Instructions for Authors
Note regarding SIAM's macros: Authors are highly encouraged to prepare their papers using SIAM's standard LaTeX 2e macros. Although doing so is optional, using the SIAM macros enables features that will aid editors and referees during review as well as reducing the time needed to process a paper after acceptance. If an author chooses not to use the SIAM macros, the SIAM office will reformat Plain TeX and AMSTeX files to use SIAM's standard LaTeX 2e macros after the paper has been accepted for publication. The SIAM standard LaTeX 2e macro package and documentation are available here or by email request to email@example.com.
Submitting a Manuscript
SIAM Journal on Matrix Analysis and Applications (SIMAX) accepts submissions in electronic form. Hard-copy submissions will not be considered. Please enter submissions directly into the Journal Submission & Tracking System at http://simax.siam.org. Authors should submit both the manuscript and a cover letter in PDF format. Note: Figures, if any, must be embedded "inline" in the manuscript.
If you have not used the Journal Submission & Tracking System previously click on "New authors should register for an account." Fill out name, address, e-mail and other contact information requested. You now have a username and password. If you're an author, you can click on the Submit Manuscript link under Author Tasks. The manuscript submission process, including uploading your files, should take no longer than a few minutes. Instructions for using the Journal Submission & Tracking System are available here.
If you have any questions at any time, e-mail SIAM directly at firstname.lastname@example.org.
Submission of a manuscript to SIMAX is representation by the author that the manuscript has not been published or submitted simultaneously for publication elsewhere. In general, papers that have appeared in conference proceedings will not be considered unless significantly revised. If a paper has appeared previously, in any form, authors must clearly indicate this in both their cover letter and in a footnote on the first page of the paper.
With the exception of those works indicated clearly in both a cover letter and a footnote on the first page of the paper, the authors certify that the general content of the manuscript, in whole or in part, is not submitted, accepted, or published elsewhere, including conference proceedings. Authors should upload any such indicated overlapping works as supporting materials to the submission.
The authors also certify that the general content of the manuscript, in whole or in part, will not be submitted, accepted, or published elsewhere, including conference proceedings, while it is under consideration or in production. The only exception is if the authors have received specific prior written approval from the editor-in-chief. These policies do not prohibit releasing the manuscript as a technical report, posting the manuscript to a preprint server, or publishing a short abstract at a conference or workshop that does not formally publish reviewed proceedings.
Failure to adhere to this policy is cause for rejection of the manuscript.
If your paper contains material (for example, tables or figures) from another source, that material must be accompanied by written permission from the copyright holder. Permission is needed in cases of alternations to the original, as well. Complete addresses (including e-mail addresses and fax and phone numbers) should be provided for all authors. To assist referees unpublished references can also be submitted with an indication of whether they have been accepted for publication
Authors may suggest an editor from among those listed on the journal's masthead, but the editor-in-chief has the exclusive right to assign papers to members of the editorial board. The editors reserve the right to reject any manuscript that does not conform to the journal's standards.
Authors are encouraged to submit Supplementary Materials to complement articles in SIMAX. Supplementary Materials are not refereed but will be available to referees. These might include additional figures or examples, animations, data sets used in the paper, computer code used to generate figures or tables, or other materials that are necessary to fully document the research in the paper or to facilitate the readers' ability to understand and extend the work. See Supplementary Materials for more information.
Original scholarship: A large duplication of another author's or one's own work is a sign of poor scholarship. There is also a copyright issue if the source is not cited. Your manuscript should provide proper citations, use quotation marks or indentation (for quotations of five or more lines) to indicate borrowed wording, and minimize duplication. Refusal by an author to make these necessary changes is grounds for rejection.
Potentially Offensive Material: There is no general rule on what material is appropriate for publication in SIAM Publications. However, if a handling editor believes that the use of some material (text, images, etc.) may offend SIAM readers, the publication reverts to the editor-in-chief who will engage in an exchange with the authors on the need for the particular material and whether alternatives can be identified to express the same results. Unless the authors can make convincing arguments that the particular material is essential to convey the scientific contribution, it is expected that the material be replaced prior to review and further consideration for publication.
Resubmission: A resubmission of a manuscript previously rejected by this journal will generally not be considered for publication. If the author seeks an exception to this policy, or if the manuscript was previously rejected by another SIAM journal, the history of the manuscript will be available to the handling editor and possibly to referees. The cover letter should give a detailed response explaining how each comment of the previous referees has been addressed. The manuscript might be sent to the same editor and referees or to different ones.
TeX papers: Authors of accepted papers are asked to submit their TeX files to SIAM for typesetting. (SIAM cannot accept electronic files for papers produced on any other typesetting or word processing system.) More detailed information on SIAM's TeX-typesetting procedures is sent to authors upon receipt of manuscript submissions.
Illustrations: All illustrations must be of professional quality with no handwritten elements. Note that tables and algorithms are not considered figures and should not be treated as such. Illustrations must be numbered consecutively and cited in the text. If your article is accepted for publication, SIAM will accept electronic (TeX, PDF, PNG, JPG, and EPS) figure files. Hand-drawn artwork will not be accepted. SIAM will not redraw figures. Illustrations must use lines 1 point or thicker; thinner lines may break up or disappear when printed. When choosing line weight and character size, keep in mind that illustrations may be reduced.
Color text and color figures: SIAM journals are printed in black and white. For optimum quality all text within the article must be in black. Though art may appear in color online, it is printed in color only when it is deemed by the editor to be scientifically necessary. If it is your wish or expectation that any of the figures in your paper appear in color in the printed version, please inform us immediately. Color art that is not deemed scientifically necessary by the editor can be printed in color at the author's expense.
Title: Titles should be brief and appropriate for indexing and should specifically describe the content of the paper.
Abstract: An abstract not exceeding 250 words that summarizes the principal techniques and conclusions of the manuscript in relation to known results must accompany each manuscript. Because the abstract must be able to stand independently, mathematical formulas and bibliographic references should be kept to a minimum; bibliographic references must be written out in full (not given by number).
Key words and AMS subject classifications: Lists of key words and AMS subject classifications must accompany all articles. The subject classifications are listed in the Annual Index of Mathematical Reviews and can be accessed or searched online at http://www.ams.org/msc/.
Abbreviated title: An abbreviated title, which will be used as a running head, must accompany all articles, must not consist of more than 50 characters (including spaces), and must not contain abbreviations.
References: References should be listed in either alphabetical order or order of citation at the end of the manuscript. The following reference styles should be used:
- Journal articles (titles of journals should be abbreviated in accordance with Mathematical Reviews; abbreviations are available at http://www.ams.org/msnhtml/serials.pdf):
 R. T. Rockafellar, Lagrange multipliers and optimality, SIAM Rev., 35 (1993), pp. 183-238.
- Books, pamphlets, research reports:
 B. Mandelbrot, Fractal: Form, Chance and Dimension, W. H. Freeman, San Francisco, CA, 1977.
- Paper in a bound collection:
A. Nagurney, Parallel computation of economic equilibria, in Applications on Advanced Architecture Computers, G. Astfalk, ed., SIAM, Philadelphia, PA, 1996, pp. 265-276.
- Acceptable variants on SIAM's references style are:
[R] R. T. Rockafellar, Lagrange multipliers and optimality, SIAM Rev., 35 (1993), pp. 183-238.
R. T. Rockafellar (1993), Lagrange multipliers and optimality, SIAM Rev., 35, pp. 183-238.
Page limit policies: SIAM Journal on Matrix Analysis and Applications has a page limit policy of 20 pages per paper. Please refer to the Editorial Policy for more information.